The Cost of Not Protecting Our Workforce

A report generated by OSHA highlights the real costs associated with on the job injuries, who pays them and how this impacts the employee and taxpayers.

Whether an employee is working on a high-rise building or driving a forklift, employers have the responsibility, and what we feel is an obligation to protect their employees from injury. By investing in training and safety, employers get fewer injuries, lower costs, more productivity and an improved satisfaction which often leads to less turn over. But all companies do not feel that way. Many are finding ways to avoid responsibility for providing safe working conditions for their most dangerous jobs.

The report highlights what some companies do to avoid responsibility and what this does to not only the employee, but his/her family and taxpayers when an accident with injury occurs. Shifting the financial burden however does not make it go away. It shifts it to over-burdened worker’s compensation and government systems. In addition, a worker who is injured can expect to make an average of 15% less income after the injury. And while the creating of OSHA in 1970 by President Nixon has greatly reduced on the job accidents, injuries and deaths dramatically, we still have approximately 4,500 deaths every year due to workplace accidents.

As a full-service forklift dealership, safety is one of our most important topics. Forklifts are dangerous pieces of equipment for the operator and anyone working around the forklift. Forklift Operator Training and Pedestrian Training is not only the law, it is our obligation to those that operate forklifts. While manufacturers work hard to innovate and make them safer, nothing can replace a well trained and cautious operator.

Report – The Cost of Not Protecting Workers


Forklifts and Economics, the Impact

Industrial trucks and forklift sales are directly tied to our economy. When our economy does well, more forklifts are required to move the goods ordered by customers and end-users. Conversely, when a downturn occurs, forklift sales drop, sometimes dramatically as they did with the recession of 2009. What few people understood until now, the economic impact these forklifts make on our economy. Recently the Industrial Truck Association in conjunction with Oxford Economics researched the topic, and below are some of the significant findings.

  • Industrial truck manufactures generate 209,600 jobs in the US, directly and indirectly.
  • The economic impact of forklift on the US economy is $25.7 billion dollars. Here in Illinois forklifts generate over $3.5 billion dollars to our state economy.
  • Over $15 billion of that contribution is a result jobs that support forklift sales and service such as service technicians, the parts that are made and sold and installed on forklifts, training centers etc…
  • The Bureau of Labor and Statistic (BLS) estimates that there are about 540,000 industrial truck operators in the US.
  • There are over 200,000 forklifts sold annually in the US.
  • Over 1 million forklifts are sold around the world each year.
  • The industrial truck industry generate about $5.3 billion dollars in state and local taxes. Here in Illinois, state and local taxes are over $271 million dollars.

As you can see, when we sell a forklift we create a lot of work not only here at Apex, but for our customers, their customers and the impact is felt all throughout our state and national economy.

Report – Industrial Trucks Effect on State and National Economics


CLARK Introduces to Seat as Part of it’s ORS

ORS

CLARK is pleased to announce the release of a new Hip Restraint Seat for its Operator Restraint System into the North American market.

This seat reflects a year and a half of CLARK development and test time. Compliant with ANSI B56.11.8, this seat combines operator comfort and productivity in a seat platform that promotes operator comfort and safety.

FEATURES

  • Thick foam padding to promote operator comfort.Seat
  • Improved seat switch technology prevents inadvertent neutral shift.
  • Easy to service and replace seat parts as needed.
  • Meets industry vibration standards. Less vibration on the operator.
  • Seat adjustment of a total 6 inches fore and aft.
  • 2.4. inches of vertical travel.
  • Larger weight range (110lbs. to 370lbs.) and larger seat area to accommodate all body types.
  • Restraints double as arm rests which allows the operator to be more comfortable when leaning left or right.
  • High visibility orange belt-easy to see.
  • 30 degrees of back angle.
  • Promotes 3 points entry/exit as per ANSI requirements.

CLARK forklifts have always been designed for comfort, safety and productivity. To learn more about our CLARK forklifts, please visit our CLARK Material Handling Showroom.


Celebrating Forklift Safety Day

Forklift Safety Day Logo

The Industrial Truck Association has announced it’s second annual Forklift Safety Day, to be held Tuesday, June 14.

While most of you won’t be able to attend, there are things you can do to take advantage of this day to help create awareness about the dangers that forklifts present and how to minimize the potential for accidents that can result in injury or death, damage to your facility, equipment and financial losses.

We’ve compiled a short list of things you can do on June 14th to improve safety on and around your forklifts.

  1. Make sure all your forklift operators have been trained and that their refresher training is up to date, if applicable or necessary.
  2. Download our “Forklift Operator Questionnaire” to help you vet new operators about their actual experience and history with forklifts.
  3. Take time to teach your forklift operators the importance of daily inspections of their forklifts. Daily inspections reduce the risk of equipment failure and catch small problems before they blossom into giant ones. You can find daily forklift inspection sheets on our Training Page for both IC and electric units.
  4. Download and post our free forklift safety posters that you can find on our Training Page.
  5. Take some time to gather any staff that operates around forklifts, but not on them, to refresh them about the dangers of this equipment and how to be sure to use safe procedures when they are in an area of your facility where forklifts are being operated.
  6. Make sure all your forklift’s maintenance is up to date. If you have a Planned Maintenance Agreement, this would be a good time to review it with your service provider to ensure all standard checkpoints as well as unique equipment attachments are being inspected and maintained properly.
  7. Review any unique “site specific” features your facility may have and be sure your operators are aware of proper handling of equipment while on or around these features (ramps, areas where floors can be slick, floor substrates that vary etc…)
  8. Make sure that training is part of your company’s orientation for anyone that will or MIGHT operate a forklift. Remember, employees that have not been properly trained aren’t even allowed to sit on and start a forklift, much less move it out of the way of anything.
  9. Make sure you forklifts have proper safety equipment and that it’s operating properly. Lights, horns, back-up alarms, seat belts, fire extinguishers etc… Check out our Blue Safety Light for pedestrian safety enhancement.
  10. Make sure you have lock-out kits to ensure that forklifts that do not pass an inspection are locked out immediately until repairs are made.
  11. Review all your forklifts for possible replacement. Old forklifts, or those that are getting “up there” in hours, might be potential threats. Review safety records and maintenance logs for your equipment. You might find this could be a good time to replace some or even all of your forklifts.-

Our goal is to help you operate safe, efficient and productive forklift equipment. To discuss forklift safety, operator training, or to get a quote on new equipment, please Contact Us or give us a call at 888-530-1832.


Section 179 is Back for 2016 and Better!

Sec179.jpgCongress has approved much needed improvements in Section 179 which allows companies, like yours, the ability to completely deduct the purchase cost of equipment the first year it is put into service. The new limits are:

Maximum 179 Deduction for 2016: $500,000

This means for qualifying equipment purchases of up to $500,000, your company can deduct 100% of the purchase price from its taxes the very first year it is put into service.

Further, this maximum will be increased annually, with the maximum tied to inflation, at $10,000 increments.

Bonus Depreciation; Maximum Qualifying Purchases: $2,000,000

Once you exceed the maximum deduction of $500,000, bonus depreciation kicks in at 50%, until you reach the maximum qualifying purchases of $2,000,000. For example, if you spend $1,000, ooo on new equipment, you can fully deduct the first $500,000, then deduct 50% of the remaining $500,000 for a total tax deduction the first year of $750,000.  It then begins to phase out dollar for dollar until you reach $2,500,000, where it is then completely eliminated.

Bonus Depreciation will be extended through 2019. Businesses of all sizes will be able to depreciate 50 percent of the cost of equipment acquired and put in service during 2015, 2016 and 2017. Then bonus depreciation will phase down to 40 percent in 2018 and 30 percent in 2019.

Note: The section 179 deduction applies to NEW and USED equipment whereas the bonus depreciation is only available for NEW equipment.

What that means to the purchase price of a NEW, $30,000 forklift? Assuming your company is in the 35% tax bracket, your effective cost, after deducting the entire $30,000 from your taxes, is only $19,500!

With Section 179 in effect for the remainder of 2015 and all of 2016, and beyond, there’s never been a better time to invest in new forklifts for your facility.

Note: We always suggest you consult your accountant or tax professional before you utilize section 179 for tax savings. Not all companies are structured the same and your savings may vary.

To learn more about Section 179, please visit; www.section179.org. Visit our New CLARK Forklifts showroom, and our Used Forklift Inventory to see our models. Then Contact Us for a quote, or give us a call at 888-530-1832. Apex Material Handling is YOUR source for all your material handling and warehouse equipment in Chicago and Peoria Illinois.


OSHA Announces it’s Top Ten Citations for 2015

osha logoThe Occupational Safety and Health Administration (OSHA) announced the preliminary Top 10 most frequently cited workplace safety violations for fiscal year 2015. Patrick Kapust, deputy director of OSHA’s Directorate of Enforcement Programs, presented the Top 10 on the Expo floor as part of the 2015 NSC Congress & Expo, the world’s largest gathering of safety professionals.

“In injury prevention, we go where the data tell us to go,” said National Safety Council President and CEO Deborah A.P. Hersman. “The OSHA Top 10 list is a roadmap that identifies the hazards you want to avoid on the journey to safety excellence.”

The Top 10 for FY 2015* are:

  1. Fall Protection (1926.501) – 6,721
  2. Hazard Communication (1910.1200) – 5,192
  3. Scaffolding (1926.451) – 4,295
  4. Respiratory Protection (1910.134) – 3,305
  5. Lockout/Tagout (1910.147) – 3,002
  6. Powered Industrial Trucks (1910.178) – 2,760
  7. Ladders (1926.1053) – 2,489
  8. Electrical – Wiring Methods (1910.305) – 2,404
  9. Machine Guarding (1910.212) – 2,295
  10. Electrical – General Requirements (1910.303) – 1,973

As you can see, forklifts and lift equipment is high on OSHA’s lists of citations. One way to avoid citations pertaining to your forklift fleet is to ensure you’re following OSHA’s regulations regarding powered industrial trucks (lift trucks), that your fleet is being properly and regularly maintained and that your forklift operators have received adequate training, and that the training is up-to-date.

If you’re unsure of your fleet’s condition or your operator’s training status, contact us at 888-530-1832 and we will help you ensure you do not end up on OSHA’s list of citations!


New OSHA Report; The Costs of Not Protecting Our Workforce

Cost of Workplace InjuriesA new report generated by OSHA highlights the real costs associated with on the job injuries, who pays them and how this impacts the employee and taxpayers.

Whether an employee is working on a high-rise building or driving a forklift, employers have the responsibility, and what we feel is an obligation to protect their employees from injury. By investing in training and safety, employers get fewer injuries, lower costs, more productivity and an improved satisfaction which often leads to less turn over. But all companies do not feel that way. Many are finding ways to avoid responsibility for providing safe working conditions for their most dangerous jobs.

The report highlights what some companies do to avoid responsibility and what this does to not only the employee, but his/her family and taxpayers when an accident with injury occurs. Shifting the financial burden however does not make it go away. It shifts it to over-burdened worker’s compensation and government systems. In addition, a worker who is injured can expect to make an average of 15% less income after the injury. And while the creating of OSHA in 1970 by President Nixon has greatly reduced on the job accidents, injuries and deaths dramatically, we still have approximately 4,500 deaths every year due to workplace accidents.

As a full-service forklift dealership, safety is one of our most important topics. Forklifts are dangerous pieces of equipment for the operator and anyone working around the forklift. Forklift Operator Training and Pedestrian Training is not only the law, it is our obligation to those that operate forklifts. While manufacturers work hard to innovate and make them safer, nothing can replace a well trained and cautious operator.

We have posted the Executive Summary of the report on our website and feel it is certainly worth a read. The full report can be found HERE.