Section 179 Tax Incentives for 2017

section-179-header

Jan 1, 2017 –   Section 179 is still affected by the “Protecting Americans from Tax Hikes Act of 2015” (PATH Act) that was signed into law on 12/18/2015. This bill expanded the Section 179 deduction limit to $500,000, where it will remain for all of 2017. For those interested, you may read the summary from the Ways and Means committee here.

Section 179 Deduction: Until further notice, Section 179 will be permanent at the $500,000 level. Businesses exceeding a total of $2 million of purchases in qualifying equipment have the Section 179 deduction phase-out dollar-for-dollar and completely eliminated above $2.5 million. Additionally, the Section 179 cap will be indexed to inflation in $10,000 increments in future years.

50% Bonus Depreciation will be extended through 2019. Businesses of all sizes will be able to depreciate 50 percent of the cost of equipment acquired and put in service during 2015, 2016 and 2017. Then bonus depreciation will phase down to 40 percent in 2018 and 30 percent in 2019.

IMPORTANT THIS YEAR: Section 179 for Current 2017 Tax Year
Section 179 can provide you with significant tax relief for this 2017 tax year, but equipment and software must be financed and in place by midnight December 31, 2017. Use this 2017 Section 179 Calculator to see how much the Section 179 tax deduction can save your company.

 

2016 Section 179 Tax Information (Last Year)

The PATH ACT passed in December of 2015 affected 2016 and beyond, making the Section 179 deduction for 2016 $500,000. In addition, the 50% Bonus Depreciation was reinstated.
Click Here for the fully updated Section 179 Calculator for tax year 2016 (Last Year).

Answers to the Three Most Common Section 179 Questions

How Much Can I Save on My Taxes in 2017?
It depends on the amount of qualifying equipment and software that you purchase and put into use. See the handy Section 179 Calculator that’s fully updated for 2017, and includes any/all increases from any future legislation.

What Sort of Equipment Qualifies in 2017?
Most tangible business equipment qualifies. Click here for qualifying property.

When Do I Have to Do This By?
Section 179 for 2017 expires midnight, 12/31/2017. If you wish to deduct the full price of your equipment from your 2017 taxes and take advantage of the new higher deduction limits, it must be purchased and put into service by then.

Many businesses are finding Section 179 Qualified Financing to be an attractive option in 2017, especially since the expected Federal Discount Rate increases don’t leave much time for action. Please apply today.

 

More Section 179 Deduction Questions Answered

Welcome to Section179.Org, your definitive resource for all things Section 179. We’ve brought together a large amount of information regarding Section 179, and clearly and honestly discuss the various aspects of IRS §179 in plain language. This will allow you to make the best possible financial decisions for your company.

Section 179 can be extremely profitable to you, so it is to your benefit to learn as much as possible. To begin, you may have a lot of questions regarding Section 179 such as:

We’ll answer all of these questions, and make certain that you come away with all of the knowledge you need to make smart business decisions in this 2017 tax year regarding equipment and/or software purchasing and Section 179.

Why? Because if you’ve been thinking about buying or leasing new equipment and/or software, it’s definitely to your advantage to use this excellent tax break.

Successful businesses take advantage of legal tax incentives to help lower their operating costs. The Section 179 Deduction is a tax incentive that is easy to use, and gives businesses an incentive to invest in themselves by adding capital equipment. In short, taking advantage of the Section 179 Deduction will help your business keep more capital, while also getting needed equipment, vehicles, and software.

Free Tools that Make Calculating Section 179 Deductions Simple

Section 179 is really very simple. You buy, finance or lease qualifying equipment and/or software, and then take a full tax deduction on it this year (also, there are a few other things, which we’ll go over, but in a nutshell, that’s the idea). To give you an estimate of how much money you can save, here’s a Section 179 Deduction Calculator to make computing Section 179 deductions simple.

If you use the calculator, take note of the savings on your tax obligation. Many people find that, if they lease or finance their Section 179 qualified equipment, the tax savings actually exceed the first year’s payments on the equipment (making buying equipment profitable for the current tax year). This is perfectly legal, and a good example of the incentive that Section 179 provides small and medium businesses.

Visit our website to learn more about our line-up of new material handling equipment, including:

Apex Material Handling is your source for quality material handling equipment, service, parts and rentals. Visit our website to learn more. Then contact us for a quote at 888.530.1832.

Advertisements

Forklift Purchase Price vs. Total Ownership Costs

When you are purchasing a new forklift or aerial lift, you obtain competitive quotes, verify specifications and generate a purchase order. For that matter, just about anything we purchase goes through the same process. However, there is much more to purchasing forklifts and other material handling equipment. We have found, over the years, that often there are variables that can greatly affect the total cost of ownership of anything, be it an automobile, forklift or a giant cargo container.

The price you pay for your piece of equipment, by most accounts, reflects about 10% of the total ownership costs of that piece of equipment. This leaves 90% of your total costs up in the air. Depending on many variables, you could pay much more for the equipment than you needed to, or much less. These variables include:

Performance and Reliability of Equipment – Comparing cost per hour to operate can give you a good idea of what competing pieces of equipment will cost you over their useful life. When comparing cost per hour to operate, you should be sure you’re comparing similar models under similar circumstances. A lift truck operating 1500 hours a year for a light weight product manufacturer will cost far less over its lifetime than the same lift truck operating at a recycling facility. This cost should reflect general maintenance requirements as well as fuel costs.

Fuel Consumption – While this is often a part of performance and cost per hour, knowing the fuel costs for each comparing brand and calculating total costs over the life of the equipment can sometimes be quite an eye-opener. In addition, what are your fuel alternatives? Can you use electric models? Thinking outside the box may result in lower costs to power your forklift and other lift equipment.

Specifications vs. Operations – It is rare that two 5,000-lb-capacity forklifts from competing brands will have similar specifications. Knowing what your facility will accommodate and comparing that with each model will give you insight into how each model will perform, given your operating parameters. Factors include: aisle width vs. turn radius, draw bar pull, suspension and ergonomics compared to your floor condition, indoor/outdoor use and ceiling height/rack height vs. max lift height. You will also want to compare features between brands to ensure that each lift truck model is equipped with the proper components to meet your operational requirements. For example: Can it operate properly inside your ice cream freezer?

Ergonomics – A comfortable and smooth-running piece of equipment will provide you with increased productivity. These are costs hidden in equipment that are quite real in daily operating conditions. How much time and research and development, does each brand put into the comfort and ease of use of their equipment? Happy, comfortable operators are simply more productive.

Safety – Never underestimate the safety features of your equipment. What equipment is being specified and what equipment is optional from each manufacturer is very important to know. Reducing your accident costs or product/facility damage can make a big difference in your total fleet operational expenses.

Useful Life – Finally, how many hours can you expect from each piece of equipment until the cost to operate becomes cost-prohibitive? This can vary widely depending upon brand and model. But having some qualitative and quantitative information on hand, if possible, will help you make a better decision about the total cost of operating each unit/model.

There are many factors beyond price tag or lease rate that can help you make good decisions about the equipment you purchase. Having a partner that listens, evaluates and fulfills your needs is essential in building a fleet that is most productive and less costly in the long run. Contact us at 888-530-1832 to speak to one of our material handling professionals about the right forklift for your operation.


Section 179 is Back for 2016 and Better!

Sec179.jpgCongress has approved much needed improvements in Section 179 which allows companies, like yours, the ability to completely deduct the purchase cost of equipment the first year it is put into service. The new limits are:

Maximum 179 Deduction for 2016: $500,000

This means for qualifying equipment purchases of up to $500,000, your company can deduct 100% of the purchase price from its taxes the very first year it is put into service.

Further, this maximum will be increased annually, with the maximum tied to inflation, at $10,000 increments.

Bonus Depreciation; Maximum Qualifying Purchases: $2,000,000

Once you exceed the maximum deduction of $500,000, bonus depreciation kicks in at 50%, until you reach the maximum qualifying purchases of $2,000,000. For example, if you spend $1,000, ooo on new equipment, you can fully deduct the first $500,000, then deduct 50% of the remaining $500,000 for a total tax deduction the first year of $750,000.  It then begins to phase out dollar for dollar until you reach $2,500,000, where it is then completely eliminated.

Bonus Depreciation will be extended through 2019. Businesses of all sizes will be able to depreciate 50 percent of the cost of equipment acquired and put in service during 2015, 2016 and 2017. Then bonus depreciation will phase down to 40 percent in 2018 and 30 percent in 2019.

Note: The section 179 deduction applies to NEW and USED equipment whereas the bonus depreciation is only available for NEW equipment.

What that means to the purchase price of a NEW, $30,000 forklift? Assuming your company is in the 35% tax bracket, your effective cost, after deducting the entire $30,000 from your taxes, is only $19,500!

With Section 179 in effect for the remainder of 2015 and all of 2016, and beyond, there’s never been a better time to invest in new forklifts for your facility.

Note: We always suggest you consult your accountant or tax professional before you utilize section 179 for tax savings. Not all companies are structured the same and your savings may vary.

To learn more about Section 179, please visit; www.section179.org. Visit our New CLARK Forklifts showroom, and our Used Forklift Inventory to see our models. Then Contact Us for a quote, or give us a call at 888-530-1832. Apex Material Handling is YOUR source for all your material handling and warehouse equipment in Chicago and Peoria Illinois.